These products may be protected by one or more Vision patents. Patent information can be obtained at http://www.visionhardware.com/patents
10273
10353
10375-30GF
10385-30GF
1056
1088
1954.103
19541
19541.101
19541.210
1963
1972
2262-LR
2693E-LR
31606
3198TR
3206CRD
3222
3225DB
4540.003
466031A
50552
610
9206R.WH.BLUE
9317
9346
9350
9352
9354
9356A
9381
9382
screen plunger assembly
screen corner w/ pull tab
Screen corner, plastic, external, miter, .22 x .32" leg, match with 10385, having two material: PA6, PA6+30%GF
Screen corner, plastic, external, miter, stop, .22 x .46" leg, match with 10375, 30% glass filled nylon
Screen corner, zinc, internal, with dimples, mill finish
Screen plunger, aluminum shaft assembled with spring
HOLE PLUG
3/8" hole plug, tall ribs
Hole plug, plastic, with extended ribs
Hole plug, plastic, with extended ribs
Screen crossbar clip, plastic
grid clip, plastic, snap-in
sill insert end cap, handed
tilt latch, round end, handed, ellipical button, w/ screw tab, matte finish, inquire about various offsets
Composite sweep lock, 2.25" C/L, .36" throw, .43" setback, squared housing, tongue without nibs, with glossy finish, with ribs on the lever
Sweep lock, 3198 with pad marking "Traco"
Sash lock, surface mount, 1.875" C/L, .688" setback, #6 screw, step on housing
Sash lock, surface mount, 2.062" C/L, .688" setback, #6 screw
Sash lock, surface mount, 1.875" C/L, .688" setback, #6 screw, snap-back lock, unique spring design eliminates exposing the cam in the partially open position
Composite keeper, surface mount, match with 31911 lock
sash pivot pin, steel
Die-cast moving pulley system, metal housing+plastic wheel
Sash lock, surface mount, 2.062" C/L, .438" set back, #8 screw, hooded, FER compliant, 600 series, FER= Forced Entry Resistance
Keeper
Face mount keeper,1" C/L
Keeper, sash, surface mount, #6 screw, 2.085" C/L, closed back, material: zinc alloy
Keeper, sash, recessed surface mount, for 600 series hooded lock, #8 screw, 2.079" C/L, material: zinc alloy
Keeper, sash, recessed surface mount, for 600 series hooded lock, 2.062" C/L, # 6 screw-base and #4 screw-head, material: zinc alloy
Keeper, sash, face mount, for 600 series non-hooded lock, #8 screw, 1" C/L, material: zinc alloy
Keeper, sash, surface mount, for non-hooded 600 series hooded lock, #6 screw, 2.062" C/L, closed back, material: zinc alloy
Top Mount Keeper, 2.25" C/L
Keeper, sash, surface mount, #6 screw, 2.25" C/L, closed back, material: zinc alloy, match with 9280 lock
